6
English
If cleaning with brush
1. Brush off
any hairs
from the
clipper and
from around
the blade.
2. Remove the
blade and
brush off
the hairs
from the
blade edge.
3. Brush the hairs out
from between the fixed
blade and the moving
blade while pressing
down on the lever for
cleaning to raise the
moving blade.
After cleaning the blade with water or brush
1. Apply a drops of the oil to each indicated point.
2. Remount the blade on the clipper.
Apply the oil to the clipper after use. Otherwise the blades may
become dull, make abnormal noises, or becomes hot and lead to
the deterioration of cutting performance.
►
►
•
Removing the built-in rechargeable battery
Remove the battery as illustrated.
Disconnect the clipper from the AC adaptor when removing the
battery.
Discharge the battery completely before removing it.
Be careful not to short the + and ‑ terminals of the battery after
removing it.
WARNING ‑ Do not attempt to replace the batteries for the
purpose of reusing the clipper. This could result in the risk of fire
or electric shock.
Important notice regarding environmental protection
The built‑in rechargeable Nickel‑Metal Hydride battery contains
substances that may be environmentally harmful. Please remove
the battery before discarding your clipper.
For environmental protection and recycling of materials
This clipper contains a Nickel‑Metal Hydride battery.
Please make sure that the battery is disposed of at an officially
assigned location, if there is one in your country.
1.
2.
3.
To Next Page
Loading...
