Panasonic ER-GK80 - Parts Identification; Preparation

9
English
Parts identication

A



C
F G
E
B


D




ER‑GK81 ER‑GK80




Main body
1 Power switch
2 Charge status lamp
(
)
3 Appliance socket
4 Blade
Trimming height
comb attachment
5 Dial
6 Trimming height
indication mark
Skinguard attachment
AC adaptor (RE9-86)
7 Adaptor
8 Power plug
9 Cord
0 Appliance plug
Accessories
Cleaning brush
Oil
Pouch
Preparation
Charging
• Make sure that the main body is turned off.
1
Connect the appliance plug to
the appliance socket.
2
Plug in the adaptor into a
household outlet.
• Check that the charge status
lamp (
) glows.
• Charging is completed after
approx. 1 hour.
2
1
3
Disconnect the adaptor when the charge status
lamp stops glowing.
(for safety and to reduce energy usage)
<How to check if the charging is completed>
Remove and reinsert the appliance plug. If the
charge status lamp glows and turns off after
approximately 5 seconds, it is completed.
You cannot operate the trimmer while charging.
Notes
• If there is noise from the radio or other sources while
using or charging the appliance, move to a different
location to use the appliance.