To Next PageTo Next Page
Need help?Do you have a question about the Panasonic ER-GP707 and is the answer not in the manual?
General| Motor Type | Linear Motor |
|---|---|
| Motor Speed | Up to 10, 000 RPM |
| Voltage | 100-240V |
| Charging Time | 1 hour |
| Cord Length | 2.5 m |
| Wet/Dry Use | Yes |
| Cutting Lengths | 0.8 mm - 2.0 mm (with adjustment) |
| Attachment Combs | 3, 6, 12 mm |
| Power Source | Rechargeable battery |
| Operating Time | 50 minutes |
| Accessories | cleaning brush, oil |
Select trimming heights, set dial to "0.8", and mount attachment to main body.
Slide one side of the attachment off the mounting in the direction indicated with the arrow.
Set dial to "2.0", fit mounting hook into blade mounting, and push until it clicks.
Hold the main body, push the blade with your thumb while catching it with your other hand.
Apply lubrication oil at the marked places before and after each use.
Appliance for professional trimming, operates on AC or battery; may warm up during use.
Apply lubrication oil before/after use; failure causes bluntness, shorter time, louder sound.
Do not use other blades; avoid contact with hair chemicals like wave lotion or spray.
Check attachment installation; symbol indicates detachable power supply unit type.
Identifies main body parts: trimming height indicator, power switch, dial, recharge/status lamps.
Identifies blade parts: mounting hook, cleaning lever, moving blade, stationary blade.
Identifies comb attachments (3/4mm, 6/9mm, 12/15mm) for different cutting heights.
Connect appliance plug to stand socket and place appliance on the charging stand.
Insert adaptor into outlet; charging completes in approx. 1 hour, check charge status lamp.
Disconnect the power plug after charging is completed for safety and energy saving.
Charge lamp glows when charging starts; blinks every second when completed.
Charge every 6 months if unused; recommended temperature 0-35°C for optimal charging.
Check blades for damage, turn appliance off, apply lubrication oil before use.
Set the dial to the desired height (0.8-2.0mm) and use attachments for higher settings.
Press the power switch to turn on the appliance.
Connect appliance plug to socket and plug adaptor into household outlet for AC operation.
Appliance can be used while plugged in; low battery may cause slow blades.
Clean main body, blade, and attachment after each use using a damp cloth or brush.
Apply lubrication oil to the blade before and after each use for optimal sharpness.
If blunt, charge appliance, clean blade, apply oil, or replace blade.
Ensure proper connection to stand/plug, charge within recommended temperature range.
Apply lubrication oil and confirm that the blade is properly attached.
Remove batteries safely before disposing the appliance; do not use for repair.
Appliance contains Nickel-Metal Hydride batteries; dispose at an officially assigned location.
Specifications include power source (AC adaptor), motor voltage (2.4V), and charging time (approx. 1 hour).
