11
English
• Charging is required when the
recharge lamp blinks.
• The appliance can be used for
approximately 5 minutes after the
recharge lamp blinks.
While charging
After charging is
completed
The charge status lamp
glows.
The charge status lamp
turns off.
Insert the main body again after removing it from the
charging stand.
If the charge status lamp glows and then turns off after
5 seconds, charging is completed.
Notes
• If there is noise from the radio or other sources while
using or charging the appliance, move to a different
location to use the appliance.
• The battery will deteriorate if not used for over 6
months, so make sure to perform a full charge at least
once every 6 months.
• The charging time may differ when charging the main
more than 6 months. The lamp on the main body may
charging, but will glow when continuing to charge.
•
Recommended ambient temperature for charging is
10 °C – 35 °C. It may take longer to charge, or the charge
status lamp will blink quickly and the battery may fail to
charge properly in extremely high or low temperatures.
• 1 full charge will provide approximately 50 minutes of
continuous operation. (Based on dry using at
20 °C – 30 °C)
The operating time may differ depending on the
frequency of use and the operating method.
• The battery used is a lithium‑ion, so charging after
every use will have no effect on battery life.
• To keep charging the battery will not affect battery
performance.
Charging without the charging stand
1. Connect the appliance plug to the appliance
socket.
2. Plug in the adaptor into a household outlet.
AC operation
If you connect the AC adaptor to the appliance in the
same way as for charging, and turn on the power, you
can use it.
• If the remaining battery is too low, the blades may
move slowly or stop, even with the AC operation. In
this case, charge the battery for 1 minute or more.
•
The battery will be discharged, even with the AC operation.
To Next Page
Loading...
