A Main body
1 0·CHARGE/1 switch
2 Charge status ( )
lamp
3 Appliance socket
B Blade
4 Mounting hook
5 Cleaning lever
6 Moving blade
7 Stationary blade
C 3 mm/6 mm comb attachment
D 9 mm/12 mm comb attachment
E 15 mm/18 mm comb attachment
F AC adaptor (RE9‑41)
8 Power cord
9 Appliance plug
G Cleaning brush
H Oil
I Charging stand ER1421
: Charging plug
; Socket
J Comb attachment shelf
ER1421
K Connector ER1421
Charging the hair clipper
Charge
Charging with the charging stand ER1421
1
1
Connect the power
cord to the charging
stand.
2
2
Slide the 0·CHARGE/1
switch to “0·CHARGE”.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows in red and charging starts.
Charging is completed when Charge status ( ) lamp
blinks in red once every second. (Max. 1 hour later)
10 minutes after charging is completed, the charge status
( ) lamp blinks in red once every 2 seconds.
1 full charge will provide approximately 80 minutes of
continuous operation.
•
•
•
•
To Next Page
Loading...
