Need help?Do you have a question about the Panasonic ER1611 and is the answer not in the manual?
General| Product color | Black, Silver |
|---|---|
| Number of speeds | - |
| Maximum hair length | 0.8 mm |
| Minimum hair length | 15 mm |
| Number of length steps | 6 |
| Suitable for entire body | No |
| Cordless | Yes |
| Charging time | 1 h |
| Operating time | 50 min |
| Battery technology | Nickel-Metal Hydride (NiMH) |
| Attachment combs | Head |
Weight and Dimensions| Weight | 265 g |
|---|
Clipper for hair/beard trimming; requires 8-hour initial charge.
Use specific adaptor; avoid extreme temps and direct sunlight for charging.
Keep appliance dry; it may warm up; check blades for damage before use.
Clean housing with damp cloth; avoid caustic solutions or submerging.
Not for reduced capabilities, supervise children, avoid tampering, don't grab cord.
Details power source, motor voltage, charging time, and noise level.
Lists and identifies main body, blades, attachments, adaptor, cord, and accessories.
Connect power cord to stand, turn off clipper, place on stand, plug into outlet.
Turn dial to adjust blade for desired height, from 0.8mm to 2.0mm.
Connect AC adaptor and turn on power to use, even with low battery capacity.
Select desired trimming height on attachments and set dial to 0.8.
Slide one side of the attachment off the mounting in the direction indicated by the arrow.
Instructions for removing, mounting, cleaning, and lubricating the clipper blades.
Steps to remove the blade by pushing it and mount by fitting the hook until it clicks.
Brush off hair, remove blade, brush hairs from between blades.
Apply oil between blades, set dial to 2.0, and remount the blade.
To Next Page
