Panasonic ES-EL2A - Foot Care Head Operation and Basics; Attaching, Modes, and Filing Techniques

15
English
1
1
Attach the foot care head [
H
].
• Push down rmly until you hear a “click”.
2
2
Press the power switch [
I

] to
select the NORMAL mode or
POWER mode.
• NORMAL mode and POWER mode are
recommended for rotation speed.
( Page 12)
3
3
Bring the foot care head into contact with the
skin, and begin ling.
• Filing a single location for a long time can cause it to
become hot with friction. To avoid this, be sure to make
small changes in the ling position while ling.
• Filing should be performed about once every two weeks.
The basics of foot care
Do not use the product for ling anything
other than calluses and hardened skin on
the feet.
<Use on>
Callus
ף
ס
ע
A callus is a hardened layer that forms
through repeated pressure or abrasion.
Hardened layer
Epidermis
Derma
Things to be careful of when ling
Before use After use
Hardened layer
Epidermis
Derma
Portion to be
removed
Leave some of the
hardened layer
ץ
ף
ע
ס
פ
• Filing an area too deeply can cause it to become sore or
inamed.
• Filing too large an area can result in even larger calluses
forming. Therefore, be sure to leave some of the hardened
layer.
Tips for moving the foot care head
Move in the direction indicated by the arrows.
Use your free hand to support ling.
PB015629 - ES-EL ���������_10-12-17.indd 15 2017/10/12 15:12:28