Panasonic ES-EY70A-G503

Questions and Answers

Y
youngchristineAug 14, 2025
What to do if my Panasonic ES-EY70A-G503 Epilator does not operate?
- D
  Diane AguilarAug 14, 2025
  If your Panasonic Epilator isn't turning on, there are several potential reasons: * It might not be fully charged, so ensure you fully charge the appliance. * Hair dust may have accumulated; in this case, clean the hair dust. * Shower gel may have adhered to the discs and blade. Try washing it off by soaking in warm water. * The frame might not be securely attached; reattach it. * Shower gel may have adhered to the scrub brush or brush head. Rinse in warm water, or remove the scrub brush or brush head and soak in warm water if rinsing doesn't work. * The ambient temperature may be too low; use the appliance in an ambient temperature approximately 5 °C or higher. * You may be pressing the appliance against your skin too hard; contact the skin with gentle force.
L
Lawrence GarciaAug 17, 2025
Why my Panasonic ES-EY70A-G503 Epilator cannot remove hair?
- S
  Steven WhiteAug 18, 2025
  If your Panasonic Epilator isn't removing hair effectively: * Ensure the epilation head surface is in closer contact with the skin and move it. * Move the appliance against the flow of hair. * Move the appliance slowly. * Clean any accumulated hair dust.
A
Andrea SmithAug 21, 2025
Why is my Panasonic ES-EY70A-G503 not working?
- P
  pattersonhollyAug 21, 2025
  If your Panasonic Epilator isn't operating, several factors could be at play. First, ensure the appliance is fully charged. If using the appliance in a cold environment (approximately 5 °C or lower), use it in an ambient temperature approximately 5 °C or higher. Make sure you are using gentle force. Also, check for hair dust accumulation and clean it if necessary. If shower gel has adhered to the discs and blade, wash it off by soaking in warm water. Ensure the frame is securely attached. If none of these steps work, the skin protector or discs may be deformed, cracked, or damaged.
M
mcisnerosAug 25, 2025
What to do if my Panasonic ES-EY70A-G503 stops during operation?
- E
  Elaine BurkeAug 26, 2025
  If your Panasonic Epilator stops during operation, try these solutions: fully charge the appliance. If the appliance is used in a cold environment (approximately 5 °C or lower), use it in an ambient temperature approximately 5 °C or higher. Also, make sure you are using gentle force.
P
Paul NorrisAug 28, 2025
Why Panasonic Epilator is not cutting as well as before?
- B
  Bradley Benson DVMAug 28, 2025
  If your Panasonic Epilator is not cutting as well as before: * If the file is worn out, replace the file. * If the appliance is used in the SOFT mode, try using it in POWER mode.
K
Kevin WrightAug 31, 2025
Why is my Panasonic ES-EY70A-G503 Epilator not removing hair properly?
- V
  Virginia RichardsonAug 31, 2025
  If your Panasonic Epilator isn't removing hair as well as it used to, try using it in POWER mode. Note that the blade may be deformed or worn out, or the file may be worn out.
D
David FriedmanSep 3, 2025
Why does the Panasonic ES-EY70A-G503 usage time get short?
- L
  Lauren BlanchardSep 3, 2025
  If your Panasonic Epilator usage time is getting short, fully charge the appliance.
L
Lisa HarveySep 7, 2025
How to make my Panasonic ES-EY70A-G503 Epilator remove hair effectively?
- J
  Jared KempSep 7, 2025
  If your Panasonic Epilator isn't removing hair effectively, ensure the epilation head surface is in close contact with the skin and move it. Move the appliance against the flow of hair, and do so slowly. Clean any accumulated hair dust. Contact the skin with gentle force, and apply the appliance at a 90° angle to your skin. Note that the skin protector or discs may be deformed, cracked, or damaged.
J
Jennifer BeanSep 10, 2025
What to do if I am not applying enough pressure to the skin or for a long enough time with Panasonic Epilator?
- A
  Andrew SandersSep 12, 2025
  Adjust the degree of pressure and/or amount of time while monitoring the condition of your skin when using your Panasonic Epilator.