Panasonic ES-EY90

Questions and Answers:

A
andrewsannaAug 14, 2025
What to do if my Panasonic ES-EY90 does not operate?
- A
  Anita RileyAug 14, 2025
  If your Panasonic Epilator isn't turning on, there are several potential reasons: * It might not be fully charged, so ensure you fully charge the appliance. * Hair dust may have accumulated; in this case, clean the hair dust. * Shower gel may have adhered to the discs and blade. Try washing it off by soaking in warm water. * The frame might not be securely attached; reattach it. * Shower gel may have adhered to the scrub brush or brush head. Rinse in warm water, or remove the scrub brush or brush head and soak in warm water if rinsing doesn't work. * The ambient temperature may be too low; use the appliance in an ambient temperature approximately 5 °C or higher. * You may be pressing the appliance against your skin too hard; contact the skin with gentle force.
Z
zacharyhollandAug 17, 2025
Why my Panasonic ES-EY90 Epilator cannot remove hair?
- M
  Matthew LuceroAug 17, 2025
  If your Panasonic Epilator isn't removing hair effectively: * Ensure the epilation head surface is in closer contact with the skin and move it. * Move the appliance against the flow of hair. * Move the appliance slowly. * Clean any accumulated hair dust.
S
Samuel CrawfordAug 21, 2025
Why is my Panasonic ES-EY90 Epilator not working?
- K
  Kim SmithAug 21, 2025
  If your Panasonic Epilator isn't operating, several factors could be at play. First, ensure the appliance is fully charged. If using the appliance in a cold environment (approximately 5 °C or lower), use it in an ambient temperature approximately 5 °C or higher. Make sure you are using gentle force. Also, check for hair dust accumulation and clean it if necessary. If shower gel has adhered to the discs and blade, wash it off by soaking in warm water. Ensure the frame is securely attached. If none of these steps work, the skin protector or discs may be deformed, cracked, or damaged.
K
Kathleen HillAug 25, 2025
What to do if my Panasonic ES-EY90 stops during operation?
- P
  patelaaronAug 25, 2025
  If your Panasonic Epilator stops during operation, try these solutions: fully charge the appliance. If the appliance is used in a cold environment (approximately 5 °C or lower), use it in an ambient temperature approximately 5 °C or higher. Also, make sure you are using gentle force.
C
Chad DyerAug 27, 2025
Why Panasonic ES-EY90 Epilator is not cutting as well as before?
- M
  Michelle CarrilloAug 27, 2025
  If your Panasonic Epilator is not cutting as well as before: * If the file is worn out, replace the file. * If the appliance is used in the SOFT mode, try using it in POWER mode.
C
Christopher CarlsonAug 31, 2025
Why is my Panasonic Epilator not removing hair properly?
- J
  James VaughnAug 31, 2025
  If your Panasonic Epilator isn't removing hair as well as it used to, try using it in POWER mode. Note that the blade may be deformed or worn out, or the file may be worn out.
A
Anthony NealSep 3, 2025
Why does the Panasonic Epilator usage time get short?
- J
  janetbrandtSep 3, 2025
  If your Panasonic Epilator usage time is getting short, fully charge the appliance.
D
David SchmidtSep 6, 2025
How to make my Panasonic Epilator remove hair effectively?
- T
  Tara HeathSep 6, 2025
  If your Panasonic Epilator isn't removing hair effectively, ensure the epilation head surface is in close contact with the skin and move it. Move the appliance against the flow of hair, and do so slowly. Clean any accumulated hair dust. Contact the skin with gentle force, and apply the appliance at a 90° angle to your skin. Note that the skin protector or discs may be deformed, cracked, or damaged.
R
rebeccarobinsonSep 10, 2025
What to do if I am not applying enough pressure to the skin or for a long enough time with Panasonic ES-EY90?
- J
  Jennifer RaySep 10, 2025
  Adjust the degree of pressure and/or amount of time while monitoring the condition of your skin when using your Panasonic Epilator.