Why does my Panasonic ES-ED93 stop during operation?
Your Panasonic Epilator might stop during operation because it is pressed against the skin too hard, so contact the skin with gentle force. Another possible reason is that the appliance is not fully charged, so fully charge it.
What to do if my Panasonic ES-ED93 Epilator does not operate when epilating?
Your Panasonic Epilator might not operate due to several reasons: * The skin protector or discs are deformed, cracked, or damaged, request repair at an authorized service centre. * Hair dust has accumulated, so clean the hair dust. * Shower gel has adhered to the discs and blade, wash it off by soaking in warm water. * The frame is not securely attached, reattach it. * The appliance is used with approximately 5 °C or lower, use the appliance in an ambient temperature approximately 5 °C or higher.
What to do if the skin protector or discs of my Panasonic ES-ED93 Epilator are deformed?
If the skin protector or discs of your Panasonic Epilator are deformed, cracked, or damaged, request repair at an authorized service centre.
What to do if my Panasonic Epilator blade is deformed?
If the blade of your Panasonic Epilator is deformed, replace the blade.
What to do if my Panasonic ES-ED93 Epilator blade is worn out?
If the blade of your Panasonic Epilator is worn out, replace it. For guidelines, replace the outer foil approximately every year and the inner blade approximately every 2 years.
What to do if my Panasonic ES-ED93 file is worn out?
If the file of your Panasonic Epilator is worn out, replace the file. A guideline for replacement is approximately every year.
What to do if my Panasonic ES-ED93 is used in the SOFT mode?
If your Panasonic Epilator is used in the SOFT mode, try using it in NORMAL mode.
Why is the usage time of my Panasonic ES-ED93 so short?
If your Panasonic Epilator's usage time is short, fully charge the appliance. Also, avoid pressing the appliance too hard against your skin. Use gentle force.
Why is my Panasonic ES-ED93 not removing hair properly anymore?
If your Panasonic Epilator is not removing hair as well as before, clean any accumulated hair dust. If the skin protector or discs are deformed, cracked, or damaged, request repair at an authorized service center.
What to do if my Panasonic ES-ED93 does not operate?
If your Panasonic Epilator is not operating, clean any accumulated hair dust. If shower gel has adhered to the discs and blade, wash it off by soaking in warm water. If the skin protector or discs are deformed, cracked, or damaged, request repair at an authorized service center.
To Next Page
General