Panasonic ES-ED93 - Replacing the Outer Foil and the Inner Blade; Replacing the File

20
Foot care head
1. Apply liquid hand soap to the central part of the le.
2. Pour a small amount of water on the le and turn the
switch on.
3. Rinse any debris thoroughly with water or lukewarm
water.
4. After turning the switch off, remove the frame and rinse
inside.
5. Wipe with a dry cloth and dry in a well‑ventilated
location.
3
4
5
Replacing the outer foil and the inner
blade
ES-ED93 / ES-ED53
We recommend replacing the outer foil [
H
9
] every year and
the inner blade [
H

] every two years. Remove the outer foil
of the shaver head [
H
] only when replacing it.
Replacing the outer foil
1. While pushing the outer foil gently with the ngers, use
a ngernail to release the plastic panel ( ) on the blade
from the hooks ( ) on the inside of the frame.
2. The new outer foil should be slightly bent and pushed
in until it is hooked in the frame.
12
Replacing the inner blade
1. Remove the inner blade by holding it
at both ends and pulling straight
away from the shaver.
2. Insert the inner blade by holding it at
both ends and press downward.
Replacing the le
ES-ED93
Thelelifetimeisapproximately1year(assumingasingle
use every 2 weeks with approximately 10 minutes per use).
Werecommendreplacingtheleaboutonceayear.
1. Press down with your nger and release the le.
2. Align the shaped part with the mark side and
press down.
PB013862 - ED93-53-23������_(01EN)_10-18-16.indd 20 2016/12/8 16:51:50