Panasonic ES-LS9AX - Cleaning, Drying, and Charging Procedures; Routine Cleaning and Charging Cycle; Shaver Head Pivot Action and Locking

16
English
Trimming sideburns Pre‑shave of long beards
►Switching the shaver head
You can change the pivot action.
“
”
The shaver head is moved to
prevent missed spots.
“ ”
You can lock the shaver head.
Cleaning, drying, charging
We recommend cleaning the shaver after each use.
1
Insert the shaver into the
self-cleaning recharger
and plug the adaptor into
a household outlet� (See
page 12�)
• Check that the charge status
lamp (
) is glowing.
• When the LOW lamp or the
STATUS lamp lights up, see
page 21.
1
2
1
2
Press �
The CLEAN lamp and the DRY lamp glow, and the
“AUTO” mode will start after approximately 6 seconds.
• It is not possible to change the mode after the
“AUTO” mode has started.
Clean
10 min
Dry
80 min*
Charge
0 to 60 min
* When the ambient temperature of the self‑cleaning
recharger is low (approx. 15 °C or lower), the
drying process will take up to 170 min.
3
Remove the adaptor after the selected
mode is completed�
ES-LS9AX_ASIA.indb 16 2021/10/07 12:41:37