Panasonic ES-LT2B - Switch Lock Operation and Initial Cleaning; Switch Lock Operation; Cleaning the Shaver (Water)

15
English
Operation and display of the switch lock
►Locking the power switch
1. Press once
and then
release.
• The shaver
starts
operating.
2. Hold
for
more than
2 seconds.
• The switch
lock lamp
(
) will light
up for
5 seconds
andturno󰀨.
•
The shaver will
stop operating.
3. Release .
►Unlocking the power switch
1. Hold for more than
2 seconds.
• The switch lock lamp
(
)willturno󰀨.
2. Once the shaver starts
operating, release
.
• The power switch is locked when the switch lock lamp
(
) blinks for 5 seconds and the shaver does not
operate even though the power switch is pressed.
Cleaning the shaver
We recommend cleaning the shaver after each use.
Cleaning with water
• Turntheshavero󰀨anddisconnecttheACadaptor.
1. With the cleaning shutter closed, apply
some hand soap and some water to the
system outer foil.
2. Turn the shaver on and make foam for
a few seconds.
▼