Panasonic ES-LT2B - Brush Cleaning and Part Replacement Guide; Replacing Outer Foil and Inner Blades

17
English
Cleaning with the brush
Remove the outer foil section and the inner blades.
(See this page.)
Do not use any brush other than the supplied one.
►Cleaning with the long brush
Clean the foil frame, system
outer foil, the main body and the
trimmer using the long brush.
►Cleaning with the short brush
• Clean the inner blades using the
short brush by moving it in
direction as illustrated.
• Do not move the short brush
perpendicularly against the blades
as it will damage the inner blades
anda󰀨ecttheirsharpness.
Replacing the system outer foil and
the inner blades
system outer foil once every year
inner blades once every two years
►Removing the outer foil section
Press the foil frame release buttons and lift
the outer foil section upwards.
►Attaching the outer foil section
After turning the foil frame mark (
) to the
front, securely attach the outer foil section
to the shaver until it clicks.
►Replacing the system outer foil
1. Press the system outer foil release
buttons and pull down the system
outer foil.
• Do not press the system outer foil
release buttons with excessive force.
Doing so may bend the system outer
foil, preventing complete attachment
to the foil frame.
2. Align the foil frame mark (
) and the
system outer foil mark (
) and securely
attach together until it clicks.