Panasonic ES-LT2B - Troubleshooting: Operation, Sound, and Cleanliness; Operation and Sound Issues

21
English
Problem Action
Shaver does not
operate even after
charging.
Use the appliance in an
ambient temperature
approximately 5 °C or
higher.
The battery has reached the
end of its life.
The shaver will not operate
with the AC adaptor
connected. Please use the
shaver after it has been
su󰀩cientlychargedandthe
AC adaptor disconnected.
The driving sound
changes while shaving.
The shaving sensor is
operating. The sound
changes depending on the
beard thickness.
Problem Action
Makes a loud sound.
Apply oil.
The blades will not move
smoothly when there is no
oil on the blades, requiring
more power.
The shaver makes a high‑
pitched sound due to the
linear motor drive. This does
not indicate a problem.
Conrmthatthebladesare
properly attached.
Clean the system outer foil
with the brush.
The odor is getting
stronger.
This can be improved by
cleaning every time after
shaving.
Shavingsyoutinall
directions.
This can be improved by
cleaning every time after
shaving.
Clean the inner blades with
the brush when shavings are
adhering to the inner blades.
Conrmthatthecleaning
shutterisrmlyclosed.