Panasonic ES-LT2N - Parts Identification; Product Components Identification; Operation and Display of the Switch Lock; Locking the Power Switch

12
Operation and display of the switch lock
►Locking the power switch
1. Press the power
switch once and
then release.
• The shaver
starts
operating.
2. Press the power
switch for more
than 2 seconds
when the shaver
is operating.
• The shaver will
stop operating.
3. Release the
power switch.
The switch lock
lamp is off.
The switch lock
lamp will light up.
The switch lock
lamp will turn off
after 5 seconds.
Parts identification
A Main body
1 Protective cap
2 System outer foil
3 Foil frame
4 Foil frame release
buttons
5 Finger rest
6 Power switch
To turn the shaver on
and off and also lock
and unlock the power
switch.
7 Lamp display
a. Shaving sensor lamp
(
)
b. Battery capacity lamp
c. Switch lock lamp (
)
d. Charge status lamp
(
)
8 Appliance socket
9 Outer foil section
: System outer foil release
buttons
; Inner blades
< Trimmer
= Trimmer handle
> Main body rear terminals
B AC adaptor (RE7-87)
? Adaptor
@ Power plug
A Cord
B Appliance plug
Accessories
C Travel pouch
D Cleaning brush
E Oil
F Charging stand
ES-LT6N
C Charging plug
G Operating Instructions
H Guarantee Card
ES-LT6N_4N_2N_EU.indb 12 2015/04/17 12:47:12