Panasonic ES-LT4B - Preparation; Charging the Shaver

11
English


WATER THROUGH
WATER THROUGH























Front
Back

A
1 Protective cap
2 System outer foil
 Water inlets
4 Cleaning shutter
 Foil frame release
buttons
 Finger rest
 Power switch
To turn the shaver on
󰀨
and unlock the
power switch.
 Switch lock lamp (
)
 Charge status lamp
(
)
 Appliance socket
 Foil frame
 System outer foil
release buttons
 Outer foil section
 Inner blades
 Trimmer
 Trimmer handle
B
 Adaptor
 Power plug
 Cord
 Appliance plug
Accessories
C Cleaning brush
D Oil
E Travel pouch
ES-ALT4B
Preparation
Charging the shaver
• 󰀨
• 󰀨
1
Insert the appliance plug

2
Plug in the adaptor into a

• Check that the charge status
lamp (
) is glowing.
• Charging is completed after
approx. 1 hour.
1
2
3
Disconnect the adaptor after charging is
completed and the charge status lamp ( )
󰀨
Note
You cannot operate the shaver while charging.