Replacing the system outer foil and the inner blades
® appears on the lamp display once a year. (This w ill differ
dependin g on usage.) W e recom mend checking the system outer
foil and the inner blades w hen it appears.
Press the power switch for m ore than 30 seconds to turn off ф .
system o uter foil once every ye ar
inner blades once every two years
► Removing the outer foil section
Press the foil fram e release buttons and lift the
outer foil section upwards.
► Attaching the outer foil section
A fter tu rning the foil fram e m ark ( Ж ) to the front,
se curely attach the outer foil section to the shaver
until it clicks.
► Replacing the system outer foil
1. Press the system outer foil release buttons
and pull down the system outer foil.
2. Align the foil fram e m ark ( Ж ) and the
system outer foil mark (Д) and securely
attach together.
• The system outer foil cannot be reversely
attached.
• Always insert the system outer foil to the
foil fram e w he n attaching to the shaver.
To Next Page
Loading...
