©System outer foil
release buttons
©Inner blades
©Trimmer
©Trimmer handle
©A C adaptor (RE7-87)
©Adaptor
©Power plug
©Cord
©Appliance plug
Accessories
©Travel case
©Cleaning brush
©Oil
Preparation
Charging the shaver
•Turn the shaver off.
• Wipe off any water droplets on the appliance socket.
1 Insert the appliance plug
into the shaver.
2 Plug the adaptor into a
household outlet.
• Check that the charge status
lamp ( * ) is glowing.
•Charging is completed after
approx. 1 hour.
3 Disconnect the adaptor
after charging is completed.
Note
You cannot operate the shaver while charging.
To Next Page
Loading...
