• To prevent erroneous operation, place your fingers on
the finger rest while using the shaver.
• The sonic vibration cleaning mode is activated when
the power switch is pressed for more than 2 seconds
while the shaver is not operating. (See page 14.)
You cannot shave in this mode.
Operation and display of the switch lock
^Locking the power switch
1. Press 0 once 2. Press 0 for more
3. Release © .
and then release. than 2 seconds
• The switch
• The shaver until the switch
lock lamp
starts lock lamp (fl)
(fl) will
operating. turns on.
light up for
•The shaver will
5 seconds
stop operating. and turn off.
► ts
^S<J)
^-Unlocking the power switch
1. Press © for more than
2 seconds until the
switch lock lamp ( fl)
turns off.
2. Once the shaver starts
operating, release © .
• The switch lock lamp
(fl) will turn off.
To Next Page
Loading...
