English
Trimming sideburns
Pre-shave of long beards
Cleaning the shaver
We recommend cleaning the shaver after each use.
Cleaning with water
•Turn the shaver off and disconnect the AC adaptor.
1 Apply some hand soap and
some water to the system
outer foil.
2 Press (© for more than
2 seconds to activate the sonic
vibration cleaning mode.
• Splashing of foam is suppressed.
• The battery capacity lamps blink
in order.
• After about 20 seconds, it will be
automatically turned off, or you can turn it off by
pressing the power switch.
14
To Next Page
Loading...
