20
►Cleaning with the short brush
Clean the inner blades [A] using the short
brush by moving it in direction (A).
• Do not move the short brush in direction (B)
as it will damage the inner blades and affect
their sharpness.
• Do not use the short brush to clean the outer
foils.
(A)
(B)
Replacing the system outer foil and the inner blades
appears on the lamp display once a year. (This will differ
depending on usage.) We recommend checking the system
outer foil and the inner blades when it appears.
Press the power switch for more than 30 seconds to turn off .
system outer foil once every year
inner blades once every two years
►Removing the outer foil section
Press the foil frame release buttons [A4] and
lift the outer foil section [A] upwards.
►Attaching the outer foil section
After turning the foil frame mark ( ) to the
front, securely attach the outer foil section [A]
to the shaver until it clicks.
►Replacing the system outer foil
1. Press the system outer foil release
buttons [A] and pull down the system
outer foil.
2. Align the foil frame mark (
) and the
system outer foil mark (
) and securely
attach together.
• The system outer foil cannot be
reversely attached.
• Always insert the system outer foil to
the foil frame when attaching to the
shaver.
2
1
1
►Replacing the inner blades
1. Remove the inner blades [A] one at a
time.
• Do not touch the edges (metal parts) of the
inner blades to prevent injury to your hand.
2. Insert the inner blades one at a time until
they click.
21
ES-LV95_EU.indb 20 2013/07/04 18:43:14
To Next Page
Loading...
