23
English
►Self-cleaning recharger
Problem Action
The blade has not
been thoroughly
washed.
Do not add detergent and
water except when
replacing the cleaning liquid.
Doing so may deteriorate
the cleaning function.
(See page 20.)
After cleaning, oil‑like
droplets may remain on the
outside of the foil frame.
This is the lubricating
component of the cleaning
liquid and does not indicate
a problem. You may wipe it
off with a soft cloth.
The blades are not
dry or are sticky.
The blades may not dry
quickly due to temperature
conditions.
Run the “Dry/Charge” mode
again or wipe with a soft
cloth before shaving.
Problem Action
The system outer foil
cracks or deforms
during cleaning.
Do not insert any foreign
objects into the recharger.
Remove foreign objects in
the cleaning tray. (See
page 20.)
Replace the system outer
foil and/or inner blades.
(See page 19.)
The cleaning liquid
has foamed.
If you mix soapy water or
hand soap with the
detergent or use another
detergent, the cleaning
liquid will foam. Use the
self‑cleaning recharger after
thoroughly washing and
drying the shaver.
Replace the cleaning liquid.
(See page 20.)
To Next Page
Loading...
