Charge
Charging the shaver
Perform the following steps to charge the shaver if it
seems to lose the speed.
You can fully charge the shaver in 8 hours.
A full charge will supply enough power for approx. 10
shaves of 3 minutes each.
1
1
Insert the appliance plug into
the shaver.
2
2
Plug in the adaptor into a
household outlet.
When charging the shaver for the first time or when it
has not been in use for more than 6 months, please
charge it for 16 hours (in order to activate the
rechargeable battery). If you charge the shaver with
the batteries completely discharged, the charge
indicator lamp may not glow immediately. However,
the lamp will glow normally after charging for a few
minutes.
You cannot operate the shaver while charging.
•
•
About the lamp
While charging
After charging is
completed
Glows red.
The charge indicator
lamp glows and stays on
until the adaptor is
disconnected from a
household outlet.
Shave
Using the shaver
1
1
Depress the
switch lock button
and slide the 0/1
switch upwards.
2
2
Hold the shaver as
illustrated above
and shave.
To Next Page
Loading...
