17
RO H SK CZ PL FIN S N P DK E NL I F D GB
9. Attach the outer foil section to the shaver.
10.
Lubricate the shaver.
Lubrication (Oil included for ES-RT47)
To maintain shaving comfort for a long time, it is
recommended that the oil provided with the shaver is used.
1. Switch off the shaver.
2. Apply one drop of oil to each
system outer foil.
3. Raise the trimmer and apply one
drop of oil.
4. Switch the shaver on, and run it
for approximately five seconds.
5. Switch off the shaver, and wipe off any excess oil from the
system outer foil with a soft cloth.
Cleaning with the brush
►Cleaning with the long brush
Clean the system outer
foil (a), the shaver body
(b) and the trimmer (c)
using the long brush.
►Cleaning with the short brush
Clean the inner blades [A=] using the short
brush by moving it in direction (A).
• Do not move the short brush in direction (B)
as it will damage the inner blades and affect
their sharpness.
• Do not use the short brush to clean the
system outer foil.
(A)
(B)
Replacing the system outer foil and the inner blades
system outer foil once every year
inner blades once every two years
►Removing the outer foil section
Press the foil frame release buttons [A4] and
lift the outer foil section [A;] upwards.
►Attaching the outer foil section
Securely attach the outer foil section [A;] to
the shaver until it clicks.
To Next Page
Loading...
