13
RO H SK CZ PL FIN S N P DK E NL I F D GB
• The appliance can be charged even with the cleaning
liquid unit removed.
6
6
Disconnect the adaptor after charging is completed.
While charging After charging is completed
The charge status lamp ( )
glows.
The charge status lamp ( )
turns off.
Abnormal charging
The charge status lamp ( ) blinks twice every second.
• After charging is completed, turning the power switch ON
with the shaver plugged in or connected to the self‑cleaning
recharger will cause the charge status lamp (
) to turn on,
and then turn off after 5 seconds.
This shows that the shaver is fully charged.
• Recommended ambient temperature for charging is
10 – 35 °C. It may take longer to charge or the battery may
fail to charge properly in extremely high or low temperatures.
Charge the shaver within the recommended ambient
temperature range.
• When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charging time may
change or the charge status lamp (
) may not glow for a few
minutes. It will eventually glow if kept connected.
Charging without the self-cleaning recharger
You can also charge without the self‑cleaning recharger.
1
1
Insert the appliance plug [CN]
into the shaver.
• Turn the shaver off before inserting.
2
2
Plug in the adaptor [CK] into a
household outlet.
• Wipe off any water droplets on the
appliance socket.
1
2
3
3
Disconnect the adaptor after charging is completed.
• Charging the battery for more than 1 hour will not affect
battery performance.
Note
You cannot operate the shaver while charging.
To Next Page
Loading...
