22
►When the STATUS lamp glows
Problem Action
It is time to replace the
cleaning liquid.
Pour new water and detergent
into the cleaning liquid unit.
The cleaning liquid unit
is not properly attached.
Properly attach the cleaning
liquid unit.
The self‑cleaning
recharger is tilted.
Place the self‑cleaning recharger
on a horizontal surface.
After performing the above operation, press the SELECT
button and select a mode.
►When all self-cleaning recharger’s lamps blink
Problem Action
Appliance failure
Contact an authorized service
centre.
►Shaver
Problem Action
Shavings fly all over.
This can be improved by
cleaning every time after shaving.
Clean the inner blades with the
brush.
System outer foil gets hot.
Replace the system outer foil if
it is damaged or deformed.
(See page 18.)
Operating time is short
even after charging.
When the number of operations
per charge starts to decrease,
the battery is nearing the end of
its life.
Problem Action
Makes a loud sound.
Confirm that the blades are
properly attached.
Clean the system outer foil with
the brush.
The odor is getting
stronger.
This can be improved by
cleaning every time after shaving.
You do not get as close
a shave as before.
This can be improved by
cleaning every time after shaving.
Replace the system outer foil
and/or inner blades.
Expected life of system outer
foil and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
The shaver cannot be
charged with the self‑
cleaning recharger.
Gently wipe the metal terminal
of the appliance socket and the
charging terminal of the self‑
cleaning recharger with a cloth
or tissue dampened with water.
Shaver stopped
functioning.
Recommended ambient
temperature for operation is
5 – 35 °C. The shaver may stop
functioning when out of
recommended ambient
temperature range.
The battery has reached the
end of its life.
To Next Page
Loading...
