Panasonic ES-RW33 - Page 6

6
English
Cleaning
1. Remove the shaver from the
AC adaptor.
2. Apply some hand soap and
some water to the outer foil.
3. Turn the shaver on.
4. Turn the shaver off after
10-20 seconds.
5. Remove the outer foil section
and turn the shaver on.
6. Clean the shaver and the
outer foil section with running
water.
7. Wipe off any drops of water
with a dry cloth.
8. Drytheouterfoilsectionand
the shaver completely.
9. Attach the outer foil section to
the shaver.
Replacing the outer foil and the inner blades
System outer foil Once every year
Inner blade Once every two years
Replacing the outer foil
1. Press the system outer foil
release buttons and lift the
system outer foil upwards as
illustrated.
2. Insert the system outer foil by
pushing it downwards until it
clicks.
Replacing the inner blades
1. Press the foil frame release
buttons and lift the outer foil
section upwards as
illustrated.
2. Remove the inner blades one
at a time as illustrated.
• Donottouchtheedges
(metal parts) of the inner
blades to prevent injury to
your hand.
3. Insert the inner blades one at
a time until they click as
illustrated.
PB017458 - ES-RW31������_(01GB)_05-23-19.indd 6 2019/5/24 14:34:36