18
English
After using the appliance
There is a risk of bacteria propagating, so wash
thoroughly and dry before storing.
1
1
Open the water supply cap and
dispose of the water in the tank.
2
2
Turn the switch to ON, and
drain the water inside the
appliance.
Run the appliance for 2 to 3
seconds until no water comes
out.
3
3
Turn the switch to OFF.
•
•
4
4
Press the nozzle
release button,
remove the nozzle
and place it in the
storage
compartment.
5
5
Store the main
unit.
Press it in until it
clicks.
Watch out not to
clamp your fingers
in the upper part of
the tank.
6
6
Close the water
supply cap.
•
•
To store in a bag or similar after using the appliance,
wrap it in a towel or similar to absorb any excess
water.
•
To prevent bacteria propagating, take it out from a
bag or similar as soon as possible to dry.
•