4
Afterdrying,putthemainunit
uprightonthechargingstand.
1
Wipe any water away from the
nozzle and the main unit with a
towel or the like, and dry them
in a well-ventilated shade.
Store it in the upright position
・
Attach the bottom cover, and
put the main unit upright on the
charging stand.
Howtoattachthebottom
cover
a
Insert the claws (2 places) on
the front of the bottom cover
into the main unit.
b
Press in the hooks (2 places) on
the back.
ⓐ
ⓑ
Notes
• Do not wash with lukewarm water exceeding 50 °C.
• Use neutral kitchen detergent and rinse well with
water to ensure no detergent remains after cleaning.
• Never use thinners, benzine, or alcohol.
(Doing so may cause malfunction, or cracking or
discolouration of the parts.)
Iftheidenticationringcomesoff
Align the nozzle with the identication
ring (in any direction) to install it.
• Even if the identication ring is not
attached, the performance of the
nozzle is not affected.
Whenthewaterjetispoor
Remove the dirt from the lter (the tip of the suction
hose).
Filter
Rub it gently with a soft brush.
When dirt is a concern
Wipe with a dry cloth.
(Do not rinse it with water.)
Charging stand AC adaptor
Filter
Suction
hose
Brush
16
EW1511.indb 16 2019/3/28 20:44:41