-
23
-
VII
. SPECIFICATIONS
NOTE:
Weight indication
Greater than or equal to 1 kg : indicated by 0.05 kg.
Less than 1 kg : indicated by 0.01 kg.
MAIN UNIT
Model No. EY45A2
Motor voltage DC 14.4 V DC 18 V
Rated no load speed 3600 rpm (min
-1
) 4500 rpm (min
-1
)
Blade size
Outside diameter
Arbor size
135 mm
20 mm
Maximum cutting depth 0 - 46 mm (Φ135 mm blade)
Maximum torque 5.4 N•m 6.7 N•m
Overall length 292 mm (main unit only)
Weight (with battery pack: EY9L45) 2.60 kg ―
Weight (with battery pack: EY9L47) 2.40 kg ―
Weight (with battery pack: EY9L51) ― 2.75 kg
Weight (with battery pack: EY9L52) ― 2.50 kg
Weight (with battery pack: EY9L53) ― 2.55 kg
Weight (with battery pack: EY9L54) ― 2.75 kg
Noise, Vibration See the included sheet
VIII
. APPENDIX
WARRANTY SUPPLEMENT
• The breakdown and damage caused by usage consistent for a long time (e.g.: factory work on the
assembly line, etc.) is out of warranty.
• Damage or failure caused by use of accessories that are not specified in this manual will not be
covered by warranty.
EY45A2(EU).indb 23 2016-4-14 11:16:44
To Next Page
Loading...
