Panasonic EY6220 Service Manual

ORDER NO MEW/PTD9104-6220
Service Manual
Cordless Drill & Driver
EY6220
< Specifications >
DRILL/DRIVER
Motor voltage : 2.4V DC
No load speed : LOW 200 r.p.m.
HIGH 400 r.p.m.
Speed reducer type : Epicyclic gear
Speed reduction ratio : LOW 1/97.2
HIGH 1/48.6
Maximum torque : LOW 26in. lbs., 30kg-cm, 2.9Nm
HIGH 13in. lbs., 15kg-cm, 1.5Nm
Maximum clutch : 17.5in. lbs., 20kg-cm, 2.0Nm at 5 position
torque
Overall length : 9-3/8", 239mm
Weight : 0.9 lbs., 0.4kg
(with battery pack)
BATTERY PACK
Storage battery : Ni-Cd battery
Battery voltage : 2.4V DC (1.2VX2 cells)
BATTERY CHARGER
luput : 120V AC, 50-60Hz
Output : 2.4V DC
Weight : 0.86 lbs., 0.39kg
Charging time : Standard 15 minutes
< Standard equipment >
Battery charger
Battery pack
# 1 phillips bit
# 2 phillips bit
Slotted-head bit
SCHEMATIC DIAGRAM
Panasonic
Matsushita Electric Corporation of America
One Panasonic Way, Secaucus, New Jersey 07094

Panasonic EY6220 Specifications

General

Brand	Panasonic
Model	EY6220
Category	Drill
Language	English