Panasonic EYFMA2C - User Manual

EYFLA4A EYFLA9C
IMPORTANT
This manual contains safety information. Read manual completely before first using this product and save this
manual for future use.
IMPORTANT
Ce mode d’emploi contient des informations sur la sécurité. Lisez-le en entier avant d’utiliser le produit et
conservez-le pour référence.
IMPORTANTE
Este manual contiene información de seguridad. Lea completamente este manual antes de utilizar por primera
vez este producto, y guárdelo para poder consultarlo en el futuro.
Cordless Mechanical Pulse Driver / Cordless Mechanical Pulse Wrench
Visseuse à impulsions mécaniques sans fil / Clé de serrage à impulsions mécaniques sans fil
Atornillador de impulso mecánico inalámbrico / Llave de impulso mecánico inalámbrica
Model No : EYFLA4A / EYFLA4AR
EYFLA5A / EYFLA5AR
EYFLA5P / EYFLA5PR
EYFLA5Q / EYFLA5QR
EYFLA6J / EYFLA6JR
EYFLA6P / EYFLA6PR
EYFLA7A / EYFLA7AR
EYFLA8A / EYFLA8AR
EYFLA8C / EYFLA8CR
EYFLA8P / EYFLA8PR
EYFLA9C / EYFLA9CR
EYFLA9P / EYFLA9PR
EYFMA1J / EYFMA1JR
EYFMA1P / EYFMA1PR
EYFMA2C / EYFMA2CR
EYFMA2P / EYFMA2PR
Operating Instructions
Instructions d’utilisation
Manual de instrucciones

Summary

Setting Procedures

Select Torque Setting Stage

Guide selection of torque setting stage using chart.

Select Flush Detection Level

Adjust detection level when final torque cannot increase.

Fine-tune Torque Setting

Adjust torque setting for target torque and completion.

General Safety Rules

Work Area Safety

Guidelines for maintaining a safe and clean work environment.

Electrical Safety

Precautions for safe operation involving electrical hazards.

Personal Safety

Power Tool Use and Care

Intended Use

Improper Use

Additional Safety Rules

Assembly

Attaching or Removing Bits and Sockets

Attaching or Removing Battery Pack

Operation Overview

Remote Control Setup

Main Unit Operation

Switch and Forward;Reverse Lever Operation

Control Panel Overview

Torque Control and Automatic Power-off Functions

Setting the Tool to Configuration Mode

Configuring Torque Clutch Setting

Setting Snug Point Detection Level

Cross Thread Reduction Function

Rundown Error Detecting Function

Setting Impact Speed by Socket Length

Initializing All Settings

Error Display and Battery Management

Error Display Codes

Troubleshooting common tool and battery errors.

Battery Pack Use and Safety

Guidelines for optimal battery life and safe handling.

Specifications - Main Unit

Panasonic EYFMA2C Specifications

General

Voltage	14.4V
Weight	3.3 lbs (tool only)
Type	Impact Driver
Impact Rate	3, 200 IPM
Battery Type	Lithium-ion