Panasonic F10 MARK II - Page 29

EVF
White paper etc.
o Press the White Balance Set Switch (2) on the camera or on
the Camera remote controller,
The white balance is automatically set. When the white
balance setting is completed, the blinking WHITE disappears
from the viewfinder. If the blinking WHITE remains, reset
the white balance after confirming the position of the camera
and white paper.
Ne
—-WHITE—
Ae
Note: 1. In case the pictures are taken under sunlight, the
white balance setting is to be performed with a
white surface exposed to sunlight to avoid the
colour distortion and if the pictures are taken in
the shade, the white balance should be effected
in the shade,
EVF
“W w"
| Nis
w Un,
R ;
\\
‘yy
a
ae
White paper etc.
— 24 _—