Panasonic F10 MARK II - Page 6

PRECAUTIONS
The
F10
MARK
|}
is
a
sensitive,
high
quality
instrument
and
should
be
regarded
as
such.
Because
it
is
an
electrical
device,
the
danger of electric shock exists if it is used carelessly.
DON'TS | DO’S
x
Do not attempt to disassemble the camera or
RCU. In order to prevent electric shock, do
not remove screws or cover. There are no
user-serviceable parts inside.
Do not abuse the camera. Avoid striking,
shaking etc. The camera could be damaged
by improper handling or storage.
Do not use the camera in an extreme envi-
ronment where high temperature or high
humidity exist.
Do not touch the surface of the lens or CCD
filter with your fingers.
Do refer any servicing to qualified service
personnel.
Do handle the camera with care.
Use the camera in environments where
temperatures are within O°C - +40°C (32°F -
104°F), and humidity is within 10% - 75%.
Do use a mild biower or lens cleaning tissue
designed for coated lens, to clean the surface
of the lens or CCD filter in the event that
they become dirty.