Panasonic FZ-10

Troubleshooting
Please check
through the items listed
below before
requesting
repair service
f
Symptom
Checkpoint
|
JJl^No?
8
\
No power.
•
Has
the
power
cord been plugged
in properly'?
9
No
picture.
•
Have
the player and
TV set been
turned on?
10
•
Have
the player and TV set
been
connected
properly?
8
•
Is
the TV/VCR
selector set to
the correct
position?
10
No
further
operation
is
possible.
•
Set the power
switch
(POWER) to OFF and
reset the
power switch
to
ON
—
No CD
play.
•
Has the CD
been set
properly over the
center holder?
11
•
Has
the CD been inserted
with its label side facing up?
11
•
A CD which is not
compatible with the
player can
not
be
used
Front
cover
•
The CD
is dirty
—
Wipe off the dirt
using
a
soft
cloth
7
•
The lens is dirty
-»
Wipe off the dirt using a
cotton swab
or blow it
away
using a rubber
blower
for cleaning lenses
(available
from
camera
stores)
—
•
Is
the CD scratched,
cracked, or
warped? (If so, do
not
use
it
)
—
•
Has
condensation formed
on the
player?
—
Turn
off
the power,
wait an hour
or
so
for the
condensation to
dry
out,
and
then try operating the
player
—
Demonstration screen
appears but
no
further
operation is
possible.
•
Has
a
CD
been inserted?
11
•
Has
the
CD
been inserted
properly
over
the center
holder?
11
Software program
screen
appears but no
further
operation is
possible.
•
Has the
control
pad
been
connected
properly?
8
Picture appears
but
there
is
no sound.
•
Have the player
and TV set been
connected
properly?
8
•
Is the TV set
volume at
its lowest
setting or
is
it muted?
—
Something is
wrong
with the sound.
•
Has the
audio/video
cable (if used)
been connected
properly?
8
•
In the case of a
monaural
TV set, has the
pin-to-pin cable
(not supplied) been connected
properly?
9
Poor
picture
quality.
•
Have the player and
TV set been
connected
properly?
8
•
Have
the
TV
set's
brightness and contrast
been adjusted
properly?
—
•
Place the
player at
a distance from the
TV
set
—
Edges of
the picture
are
cut off or distorted.
•
This
may occur
due to the
condition of
the TV set and the
software,
and it is not a
malfunction
J
If
the problem persists even
though the steps
described above have been
taken,
discontinue
use,
disconnect
the
power cord, and consult
with
a
Panasonic service
center (In the
United States, consult
an MSC
Authorized Servicenter
for
detailed
instructions
)
Matsushita Services Company