7
(ENG) VQT4Y53
∫ Detaching the Lens
While pressing on the
lens release button B,
rotate the lens toward
the arrow until it stops
and then remove.
• Attach the lens rear cap
so that the lens contact
point does not get scratched.
• Attach the body cap to the camera so no dirt or
dust will get inside the main unit.
∫ Attaching the Lens Hood
(Supplied Accessory)
1 Align the fitting mark C
on the short side of the
lens hood with the mark
on the tip of the lens.
2 Turn the lens hood in the
direction of the arrow
until it stops, and align
the stop mark D on the
long side of the lens
hood with the mark on
the tip of the lens.
Hold the lens hood with
your fingers placed as
shown in the picture.
• Do not hold the lens
hood in a way that twists
or bends it.
VQT4Y53_ENG_SPA.book 7 ページ ２０１３年４月２日 火曜日 午後１２時１４分
To Next Page
Loading...
