8
VQT3B93
Names and Functions of
Components
1 Protective glass
2 Lens
3 Contact points
4 Lens fitting mark
Note
≥ Zoom operation is not supported.
≥ It is recommended to use a tripod or a flash to
record steady pictures.
≥ When a distance to the subject is 0.6 m to
approximately 1 m, horizontal disparity becomes
too great, and you may not see the 3D effect at
the edges of the image.
≥ Functions that can be used depend on the digital
camera you are using. Please refer to the
operating instructions of the digital camera for
details.
To ensure that the 3D pictures can be safely
viewed, pay attention to the following points
when recording.
≥ Where possible, record with the digital camera in
a horizontal state.
≥ Do not get too close to the subject (record from a
distance of at least 0.6 m).
≥ Be careful not to shake the camera while in a
vehicle or walking.
VQT3B93_E.book 8 ページ ２０１０年９月２日 木曜日 午後４時５３分
To Next Page