9
6.2. Disassembly Flow Chart
6.3. Disassembly procedure
6.3.1. Removal of the FILTER RING UNIT
and the SLIDE HOOD UNIT
1. Remove 1 screw (A), and turn the FILTER RING UNIT
arrow direction then remove it.
(In this case, LENS CAP comes off together with it.)
2. Slide the SLIDE HOOD UNIT arrow direction and remove
it.
6.3.2. Removal of the SHADING FRAME
1. Remove 2 screws (B) and the SHADING FRAME.
To Next Page
Loading...
