85
VQT2M75
Advanced
Recording
(Advanced)
8
Recording with Manual
focus
Perform focus adjustments using the multi manual ring.
If auto focusing is difficult due to the conditions, then use Manual Focus.
¬ Change the mode to or .
≥ Press the iA/MANUAL button or CAMERA FUNCTION button to switch to Manual
Mode. (l 82)
≥ For how to perform the settings when using the viewfinder, refer to page 82
A Rotate the multi manual ring to adjust the focus.
1 (When MF assist function is used)
Select the menu.
2 Touch [FOCUS].
3 Touch [MF] to change to
Manual Focus.
≥ MF appears on the screen.
4 Adjust the focus by rotating
the ring.
The in-focus area is displayed in blue. The
normal screen returns approximately
2 seconds after you finish bringing the
subject into focus.
≥ When [MF ASSIST] is [OFF], the blue
area is not displayed.
≥ To restore Auto Focus, touch [AF] of step
3 or press the iA/MANUAL button.
≥ Zoom operation cannot be performed
using the multi manual ring.
≥ The blue display does not appear on the
images actually recorded.
: [RECORD SETUP] #
[MF ASSIST] # [ON]
≥ It is possible to set from the quick
menu. (l 45)
HDC-TM700&HS700P&PC-VQT2M75_mst.book 85 ページ ２０１０年２月２３日 火曜日 午前１０時３４分
To Next Page
Loading...
