Panasonic HX-A100 How To Upgrade Firmware

VQC9867
ENGLISH FRANÇAIS ESPAÑOL
한국어
Dear Customer
About the Upgrade of the HX-A100 Firmware
The following functions were added or changed by Ver. 1.10 of the firmware.
Please read this in conjunction with the owner’s manual for this unit.
For the latest information on version updates or for information on the Image App, see the
following support site.
http://panasonic.jp/support/global/cs/e_cam/index.html
(This Site is English only.)
After making the settings according to the setup wizard screens, you can use the main functions of this unit.
Proceed to complete the setup by following the on-screen instructions.
≥ The setup wizard is displayed at the time of purchase and after a long period of non-use during
which the battery ran down.
1 Synchronize the time of this unit with that of smartphone.
≥ Once the clock is set, recording, live broadcasting, and other functions of this unit can be used correctly.
≥ It may take approximately 60 seconds to synchronize the time of the smartphone with that of this
unit.
≥ If the SSID and the password are set to their defaults, a message that recommends you to
change them will be displayed.
From the Image App screen, tap # [Camera setup] # [Device info. display] to check the
firmware version.
Update the version if it is earlier than Ver. 1.10.
To update the firmware of this unit, copy an update file to the microSD card, insert it into this unit,
and press the power button to turn on this unit while pressing and holding the Wi-Fi/WPS button
and the photoshot button.
If you are using firmware Version 1.10, use the latest version of the Image App.
∫ OS versions that support the Image App
Android device: Android 2.3.3 or later
iOS device: iOS 5.0 or later
≥ The supported OS versions are current as of April 2014 and subject to change.
≥ The service may not be able to be used properly depending on the type of smartphone being
used.
The setup procedure using the setup wizard has been changed.
ENGLISH
VQC9867.book 1 ページ ２０１４年５月１６日 金曜日 午後６時４０分

Panasonic HX-A100 Specifications

General

Sensor type	MOS
Total megapixels	3.32 MP
Optical sensor size	1/4.1 \
Effective megapixels (image)	2.8 MP
Optical zoom	- x
Image stabilizer	Yes
Interchangeable lens	No
Minimum aperture number	2.5
Memory slots	1
Camera file system	DCF, Exif 2.2
Camcorder media type	Memory card
Compatible memory cards	microSD (TransFlash), microSDHC
Internal storage capacity	- GB
Closest focusing distance	0.30 m
Built-in flash	-
Camera shutter speed	1/25-1/12000 s
Display diagonal	- \
Viewfinder type	Not available
Camcorder type	Handheld camcorder
Minimum illumination	1 lx
Product color	Orange
Protection features	Dust resistant, Water resistant
International Protection (IP) code	IPX8
Video resolutions	1280 x 720, 1920 x 1080 pixels
Maximum frame rate	50 fps
Supported video modes	1080p, 720p
Video formats supported	MP4
Maximum video resolution	1920 x 1080 pixels
Image formats supported	JPG
Maximum image resolution	3072 x 1728 pixels
Still image resolution(s)	2304 x 1296, 3072 x 1728
Audio formats supported	AAC
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) out	0
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Battery voltage	3.7 V
Battery capacity	1450 mAh
Battery life (max)	- h
Cables included	USB
Bundled software	HD Writer WE1.0

Weight and Dimensions

Depth	25 mm
Width	59.5 mm
Height	94 mm
Weight	167 g