Panasonic K-EW114L03E - Page 8

3
Record
and
Backup
Record Priority
Manual>video detect>schedule
Storage
Management
Network storage
Network
Wire Network
1-channel wire Ethernet port, 10/100 Base-T Ethernet
Network Protocol
IPv4/IPv6, HTTP, HTTPS, SSL, TCP/IP, UDP, UPnP, ICMP, IGMP,
SNMP, RTSP, RTP, SMTP, NTP(Required to synchronize to
recorder), DHCP, DNS, PPPOE, DDNS, FTP, IP Filter, QoS,
Bonjour
Remote
Operation
Monitor, system setup, file download, log information, maintenance ,
upgrade and etc
Restore Default
Setup
Reset button
IR light
IR light 30M.
General Parameter
Power
DC 12V power and PoE.
Warning！
Do not connect these two power supplying sources to the device
at the same time; it may result in device damage!
Power
Consumption
DC12V 420mA
PoE DC48V 110mA
Working
Temperature
-20℃~+60℃
Working
Humidify
≤95%
Dimensions(mm)
70×66×160
Weight
500g（Excluding box）
Installation
Bracket installation
Note
 Panasonic Security Viewer is not supported
 EMS (E-Series Management Software) & Mobile-EMS do not support i-PRO series NVR
 Only SXVGA recording is available with i-PRO series NVR
 See support web page below for further details
http://security.panasonic.com/***