Snapshot 4.2.1.2
The snapshot interface is shown as in Figure 4-3.
Figure 4-3
Please refer to the following sheet for detailed information.
Parameter Function
Snapshot Type
There are two modes: general (schedule) and Event
(activation).
Image capture
size
It is the same with the resolution of the stream(1).
Quality
It is to set the image quality. There are six levels.
Interval
It is to set snapshot frequency. The value ranges from 1s to 7s.
Video Overlay 4.2.1.3
The video overlay interface is shown as in Figure 4-4, Figure 4-5, Figure 4-6, Figure 4-7 and Figure 4-8.
.
27
To Next Page
Loading...
