Yellow color stands for the motion detect record/snapshot.
Red color stands for the alarm record/snapshot.
Figure 4-41
Step 4. In snapshot interface, click on Save. System prompts it is successfully saved.
Holiday Schedule 4.5.1.3
Holiday schedule can set specific date as holiday.
Step 1. Click on Holiday Schedule tab, see Figure 4-42.
Figure 4-42
Step 2. Select date to set as holiday. The selected date will be highlighted in yellow.
Step 3. Check Record/Snapshot, click on Save. System prompts it is successfully saved.
Step 4. Check Record Schedule/Snapshot Schedule interface, click on setup next to Holiday, refer to
setup of Monday to Sunday.
Step 5. Complete setup of holiday, then it records/snapshots according to date in holiday schedule.
64
To Next Page
Loading...
