Panasonic KX-HN3001W

Replacing the battery
R USE ONLY the specified battery.
1 Remove the screw from the battery cover.
2 Remove the battery cover.
3 Remove the currently used battery.
4 Attach and insert the replacement battery.
1
BLK: black
2
RED
2
1
5 Insert the tabs (A)
into the slots, and
then close the battery cover (B).
2
1
6 Drive the screw into the battery cover.
Battery level
Icon Battery level
High
Medium
Low
Needs charging.
*1
*1 Two beeps sound from the monitor unit
eve
ry 3 minutes when the battery needs
charging.
Lithium Ion (Li-Ion) Polymer
bat
tery performance (supplied
battery)
Operation Operating time
In continuous use 5 hours max.
Not in use (standby) 13 hours max.
For assistance, please visit http://shop.panasonic.com/support
15
Getting Started
HN3001_(en_en)_0110_ver.410.pdf 15 2018/01/10 11:43:21