84
Operations Performed with the Base Unit
Call Bar ON/OFF
When this feature is set to ON, outgoing calls cannot be made. Intercom calls and calls
to numbers assigned as emergency numbers can be made (see Setting the
Emergency Call Numbers on page 75).
To exit the operation, press at any time.
• The factory preset is “Off”.
• While the call prohibition mode is turned on, “ ” is displayed.
1
Press
MIDDLE SOFT KEY.
2
Select “Call Bar”.
3
Enter 4-digit
Base Unit PIN.
(Factory Preset 0000)
4
Select “On” or “Off”.
535E_E_04.fm Page 84 Thursday, August 7, 2003 1:33 PM
To Next Page
Loading...
