Panasonic KX-TG5631 - Registering Handset to Base Unit; Initiate Handset Registration; Initiate Base Unit Registration; Confirm Handset Registration

– 7 –
Registering a handset to base unit
The included handset and base unit are preregistered. If for some reason the handset is
not registered to the base unit, register the handset.
For further registration information, visit
http://www.panasonic.com/RegisterYourHandset
Handset
Press {MENU}, then press {0}{0}.
Handset
Press {OK}.
Base unit
L For models with only 1 handset included
Press and hold {LOCATOR/INTERCOM} until
the CHARGE indicator flashes.
L For models with 2 or more handsets
included
Press {SELECT} until the desired extension
number (H1, H2, H3, or H4) is displayed
on the base unit, then press and hold {CALL}
until the CHARGE indicator flashes.
L Complete next step within 1 minute.
Refer to manual
to prepare base.
Then press OK L
Refer to manual
to prepare base.
Then press OK
L
{MENU}
{OK}
TG563x_565x_QG(e).fm Page 7 Monday, January 23, 2006 5:35 PM