Panasonic KX-TGA401C - Phonebook and Caller List Management

10
Differences in the shared phonebook operations
Adding entries
When adding an entry to the phonebook, you can assign it to one of 9
groups.
1 {C} i {ADD}
2 Enter the party’s name (16 characters max.). i {OK}
3 Enter the party’s phone number (24 digits max.). i {OK}
4 {V}/{^}: Select the desired group. i {SELECT} 2 times
LTo add other entries, repeat from step 2.
5 {OFF}
Changing group names
The default group name is “Group 1” to “Group 9”.
1 {C} i {MENU} i {V}/{^}: “Group” i {SELECT}
2 {V}/{^}: Select the desired group. i {SELECT}
3 {V}/{^}: “Group name” i {SELECT}
4 Edit the name (10 characters max.). i {SAVE} i {OFF}
Finding and calling a phonebook entry: Searching by group
1 {C} i {GROUP}
2 {V}/{^}: Select the group you want to search. i {SELECT}
LIf you select “All groups”, the unit ends the group search.
3 {V}/{^}: Select the desired entry. i {C}
Group ringer tone (Call Display subscribers only)
You can assign a different ringer tone to the desired group.
If you select “Current ringer” (default), the unit uses the same
ringer tone as for other incoming calls when calls from this group are
received.
1 {C} i {MENU} i {V}/{^}: “Group” i {SELECT}
2 {V}/{^}: Select the desired group. i {SELECT}
TGA401C(e).fm Page 10 Monday, January 18, 2010 5:22 PM