Registering a handset to a base unit
1 Handset:
MADDN a MbN: “Panasonic DECT” a MSELECTN
2 Base unit:
Press and hold MLOCATORN for about 5 seconds.
R If all registered handsets start ringing, press MLOCATORN again to stop,
then repeat this step.
3 Handset:
Press MOKN, then wait until a long beep sounds and is displayed.
Note:
R If an error tone sounds, or if is displayed, register the handset according to
the base unit’s operating instructions.
Display language
1 MMENUN#110
2 MbN: Select the desired setting. a MSAVEN a MOFFN
6
For assistance, please visit http://shop.panasonic.com/support
Installation
To Next Page
Loading...
