Panasonic KX-TS15-W - Page 20

20
=> Special Features
How to Use the PAUSE Button
(For Analog PBX Line/Long Distance Service Users)
We recommend you press [REDIAL/PAUSE) if a pause is required for
dialing with a PBX or to access a long distance service.
Ex. Line access number (8) (PBX)
(9) =» (REDIAL/PAUSE) =»
e Pressing once creates a 3.5 second pause.
This prevents misdialing when you redial or dial a stored number.
e Pressing more than once increases the length of the
pause between numbers.
e When you store phone numbers in memory or press to
redial, if is stored anywhere after the first 5 digits,
dialing will stop where was entered. Press
to continue dialing.
Ex. To access a voice mail service: “1234567 890” is
stored in an UPPER memory location in a one-touch auto dial button
(for the One-Touch Dialer). “890” is the access number.
Lift the handset or press {SP-PHONE/HEADSET) = press the
one-touch auto dial button (“1234567" ts dialed) = follow the
pre-recorded instructions =» press [REDIAL /PAUSE} (“890” is dialed).